Table of Contents
Advertisement
Important Safeguards
1. Read Instructions
Read all the safety and operating instructions before operating the product.
2. Retain Instructions
Retain the safety instructions and user's manual for future reference.
3. Warnings
Comply with all warnings on the product and in the user's manual.
4. Follow Instructions
Follow all operating and use instructions.
5. Cleaning
Disconnect this camera from the power supply before cleaning.
6. Attachments
Do not use attachments not recommended by the camera manufacturer as they may pose safety
risks.
7. Accessories
Do not place this camera on an unstable cart, stand, tripod, bracket or table. The camera may
fall, causing serious injury to a person, or serious damage to the product. Use only withstand,
tripod, bracket, or table recommended by the manufacturer, or sold with the camera. Any
mounting of the product should follow the manufacturer's instructions, and should use
amounting accessory recommended by the manufacturer.
8. Ventilation
This camera should never be placed near or over a radiator or heat register. If this product is
placed in a built-in installation, verify that there is proper ventilation so that the camera
temperature operates within the recommended temperature range.
9. Power Sources
This camera should be operated only from the type of power source indicated on the information
label. If you are not sure of the type of power supply at your location, consult your product
dealer.
10. Power-Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords at plugs, screws and the point
where they exit the product.
11. Installation
Install this camera on a secure part of the ceiling or wall. If installed on an unsecured location the
camera could fall causing injury and damage.
12. Lightning
For additional protection on this camera during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the power
supply and cable system. This will prevent damage to the camera due to lightning and power
line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid
electric shock.
13. Overloading
Do not overload the power supply or extension cords as this can result in a risk of fire or electric
shock.
33506AA
3
Advertisement
Table of Contents
