HP ProLiant MicroServer Gen8 User Manual page 61

Power down the server (on page 14).
1.
Disconnect the power cord from the AC source.
2.
Disconnect the power cord from the server.
3.
Remove the chassis cover (on page 18).
4.
Remove the system board assembly (on page 19).
5.
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board
6.
page 9).
Install the TPM security rivet by pressing the rivet firmly into the system board.
7.
Install the system board assembly (on page 21).
8.
("System board components" on
Hardware options installation 61