•
A simple Ethernet connection with no iLO functionality
•
An Ethernet connection with iLO functionality, using the dedicated iLO connector
•
An Ethernet connection with iLO functionality, using the shared iLO connector
To connect the server to the router:
Connect a standard Ethernet cable from the modem to the router WAN port.
1.
If you prefer to have an Ethernet connection with no iLO functionality, do the following:
2.
Connect an Ethernet cable to the server NIC connector 1 or 2.
a.
Connect the cable to the router LAN port.
b.
If you prefer to have an Ethernet connection with dedicated iLO functionality, do the following:
3.
Connect an Ethernet cable to the server NIC 1 or NIC 2 connector, and then connect the cable to
a.
a router LAN port.
Setup 36