HP ProLiant MicroServer Gen8 User Manual page 31

Attach the self-adhesive rubber pads to the bottom surface of the switch.
1.
CAUTION: The switch has a limitation on how much weight can be placed on top of it. To reduce
the risk of personal injury or damage to the equipment because of an unstable server-switch
stacking, stack no more than two servers on top of the switch.
Stack the switch on either the top or the bottom of the server.
2.
If you are stacking the switch on the top of the server, you can stack up to three MicroServers.
Complete the switch Self-Test
Connect an Ethernet cable to the switch, and then connect the cable to a network jack.
1.
If you are using a wall-mount power adapter, do the following:
2.
Connect the power adapter to the switch.
a.
Setup 31