Hp Service Pack For Proliant; Hp Smart Update Manager; Hp Rom-Based Setup Utility - HP ProLiant MicroServer Gen8 User Manual

CAUTION:
original factory state, deletes the current hardware configuration information, including array
setup and disk partitioning, and erases all connected hard drives completely. Before using this
utility, see the instructions in the HP Intelligent Provisioning User Guide.
Use the Erase Utility to erase drives and Active Health System logs, and to reset RBSU settings. Run the Erase
Utility if you must erase the system for the following reasons:
•
You want to install a new operating system on a server with an existing operating system.
•
You encounter an error when completing the steps of a factory-installed operating system installation.
To access the Erase Utility, click the Perform Maintenance icon from the Intelligent Provisioning home screen,
and then select Erase.
For more information about the Erase Utility, see the HP Intelligent Provisioning User Guide on the HP website
(http://www.hp.com/go/intelligentprovisioning/docs).

HP Service Pack for ProLiant

SPP is a comprehensive systems software (drivers and firmware) solution delivered as a single package with
major server releases. This solution uses HP SUM as the deployment tool and is tested on all supported HP
ProLiant servers including HP ProLiant Gen8 and later servers.
SPP can be used in an online mode on a Windows or Linux hosted operating system, or in an offline mode
where the server is booted to an operating system included on the ISO file so that the server can be updated
automatically with no user interaction or updated in interactive mode.
For more information or to download SPP, see one of the following pages on the HP website:
•
HP Service Pack for ProLiant download page (http://www.hp.com/go/spp)
•
HP Smart Update: Server Firmware and Driver Updates page (http://www.hp.com/go/SmartUpdate)

HP Smart Update Manager

HP SUM is a product used to install and update firmware, drivers, and systems software on HP ProLiant
servers. HP SUM provides a GUI and a command-line scriptable interface for deployment of systems software
for single or one-to-many HP ProLiant servers and network-based targets, such as iLOs, OAs, and VC Ethernet
and Fibre Channel modules.
For more information about HP SUM, see the product page on the HP website
(http://www.hp.com/go/hpsum).
To download HP SUM, see the HP website (http://www.hp.com/go/hpsum/download).
To access the HP Smart Update Manager User Guide, see the HP SUM Information Library
(http://www.hp.com/go/hpsum/documentation).

HP ROM-Based Setup Utility

RBSU is a configuration utility embedded in HP ProLiant servers that performs a wide range of configuration
activities that can include the following:
•
Configuring system devices and installed options
Perform a backup before running the Erase Utility. The utility sets the system to its
Software and configuration utilities 73