WHEN USING THE IEEE 1394 CABLE WITH WINDOWS ME
1 Quit the utility software.
2 Confirm the DiMAGE Scan Elite II indicator lamp is on and not blink-
ing.
• If other USB or IEEE devices are connected to the computer, confirm that they are not in
operation before continuing.
3 Double-click on the "Unplug or Eject Hardware" icon on the task bar.
• The unplug-or-eject-hardware dialog box will appear.
4 Select "Minolta DiMAGE Scan Elite 2" and click
"Stop".
• A confirmation screen will appear.
5 On the confirmation screen, confirm the
device to be stopped. Click "OK" to stop the
device.
6 The "Safe to remove hardware" message
will confirm the operation. Click "OK" to fin-
ish.
7 Disconnect the cable.
• If the scanner is disconnected or turned off without fol-
lowing the above procedure, a message will appear to
indicate that the unsafe removal of device may cause
your computer to crash and lose valuable data. Click
"OK" and then check the image data.
87