Installing A Certificate Via Mdm; Removing Certificates; Ethernet Communication; Viewing Network Adapter Information And Renewing/Releasing Ip Addresses - Honeywell Dolphin 75e User Manual

Installing a Certificate via MDM

Administrators can use MDM software to add root and CA certificates or configure the terminal to enroll a client certificate
with an enrollment server that supports Simple Certificate Enrollment Protocol (SCEP) used for certificate based client
authentication (e.g., Wi-Fi, VPN, email). To learn how to install certificates via MDM, go to "Installing digital certificates" on
the Microsoft Developer Network (MSDN) Web site at https://msdn.microsoft.com/en-us/library/dn643705.aspx.

Removing Certificates

A Factory Reset (Clean Boot) is required to remove a certificate installed on the terminal. To learn how to perform a Factory
Reset, see Resetting the Terminal

Ethernet Communication

See Establishing Ethernet Communication

Viewing Network Adapter Information and Renewing/Releasing IP Addresses

The IPConfig app displays, releases, and renews IP parameters for on-board network adapters.
1. In the Apps list, touch IPConfig
2. From the AdapterInfo screen, touch the box under Adapter.
3. Select one of the integrated network adapters installed in the terminal from the drop down menu:
• Bluetooth Device (Personal Area Network Adapter)
• Qualcomm Atheros Wireless LAN Adapter
• Microsoft Wi-Fi Direct Virtual Adapter
Every field on the screen pertains to the adapter selected from the drop down menu. Swipe up or down to view the
following:
• Mac and IP addresses
• Netmask
• Gateway
• DHCP enabled (Yes or No)
• DHCP server
• Index
• Lease Expiration date
• Lease Obtained date
• Type (e.g. 802.11 or Ethernet CSMACD)
Swipe left to view the NetworkParams screen. This screen provides information on:
• Host Name
• DNS
• Node Type
• Routing enabled (Yes or No)
• Proxy enabled (Yes or No)
To Renew or Release the IP Address used by the selected adapter:
4. Touch more on the AdapterIndfo screen.
5. Select either RenewIPAddress or ReleaseIPAddress.
You can refresh the information shown by selecting
on page 1-13.
on page 9-6.
.
.
6 - 7