Deleting A Backup; Extras; Battery Status Settings; Changing The Button Illumination Settings - Honeywell Dolphin 75e User Manual

Deleting a Backup

To delete a backup:
1. In the Apps list, touch Settings
2. Select backup > apps + settings.
3. Select manage backups.
4. Do one of the following:
• To delete the entire backup, select the Settings backup check box and then touch delete.
• To delete only your app data, verify the Settings backup check box is clear (not checked).
Select the App backup check box, and then touch delete.

Extras

Battery Status Settings

For information on the checking the battery status, see

Changing the Button Illumination Settings

1. In the Apps list, touch Settings
2. Select button illumination.
3. Select one of the following options:
• Off,
When selected, the button backlights are always turned Off.
• On with Backlights,
When selected, the button backlights are always On, except when the terminal is in sleep mode.
• On with Backlight in Dark Environment
When selected, the button backlights turn on only when the terminal sensors indicate light levels have dropped to the
specified Brightness Threshold level. You can set the threshold to be between 0 and 999.

Modifying the Smart Sensors

To configure the integrated motion detection sensors for advanced power management:
1. In the Apps list, touch Settings
2. Select sensor settings.
3. Check the box for one or more of the following options:
• Low power mode on face down
When selected, the terminal automatically enters Sleep mode (Suspend mode) when placed face down on a flat
surface. By default this option is disabled
• Keep on when motion detected
When selected, the terminal is prevented from entering Sleep mode (Suspend mode) when motion is detected. By
default this option is disabled.
• Turn off display on face down
When selected, the terminal display is automatically turned off when placed face down on a flat surface. Once the
display turns off, the terminal enters sleep mode after 60 seconds. You can adjust the length of time between the
terminal display going off and entering sleep mode. By default this option is disabled.
• Turn off display on close proximity
When selected, the terminal display is automatically turned off when the sensors indicate something is in close
proximity to the face of the terminal. Once the display turns off, the terminal enters sleep mode after 60 seconds. You
5 - 16
.
Checking the Battery Health
.
.
on page 2-10.