Honeywell Dolphin 75e User Manual page 16

Step 3. Power On and Set Up the Terminal
The first time you power up the Dolphin terminal, you have the option to set up your handheld using one of the following
methods:
• Use a custom provisioning file (Prov.xml) to configure the terminal on startup.
Custom provisioning allows you to set up multiple devices with organization-specific settings so they are ready to use.
To learn more about creating custom provisioning XML files, see the Administrator Guide for Windows Embedded 8.1
Handheld, available from Microsoft at https://technet.microsoft.com.
• Use the Quick Start bar code to bypass custom provisioning and go straight to the Windows Start screen.
• Use the Consumer setup wizard that steps you through configuring the terminal and setting up a Microsoft® account
(optional). Once you add a Microsoft account, there is no way to change it without resetting the terminal.
How to Use the Quick Start Bar Code or a Custom Provisional Bar Code
To use a provisioning bar code:
1. Press the Power button
2. From the Welcome screen, select a language, and then next.
3. Point the terminal at the Quick Start bar code (below) or a custom provisional bar code, and then
press the Scan button. For optimum performance, avoid reflections by scanning the bar code at a slight angle.
On a successful scan, the terminal beeps twice and "configuration received" appears under the Barcode option on
the screen.
4. Touch next. "Configuration in progress" appears on the screen. When the terminal is done booting, the Start
screen appears.
How to Use a Custom Prov.xml file on an SD Card
To use a Prov.xml file saved to an SD Card:
1. Save the Prov.xml file to the root directory of the SD Card.
When using the SD card for provisioning, the file must be named Prov.xml and must be located in the root path.
The provisioning file should also be encoded as UTF-8 or UTF-16LE, including the byte order mark (BOM).
2. Install the card in the terminal.
For information on how to install the SD card, see
3. Press the Power button
4. From the Welcome screen, select a language, and then next.
The terminal automatically starts searching for provisioning data sources. When the Prov.xml file is found, "configu-
ration received" appears under the SD Card option.
5. Touch next. "Configuration in progress" appears on the screen. When the terminal is done booting, the Start
screen appears.
How to Use Near Field Communication (NFC) Technology
To use an NFC tag:
1. Press the Power button
2. From the Welcome screen, select a language, and then next.
1 - 4
.
Installing a Memory Card
.
.
on page 2-14.