Enabling Protected Management Frame (Pmf) Or Akm With Sha256 Key Derivation; Airplane Mode; Virtual Private Networks (Vpn); Adding A Vpn Profile - Honeywell Dolphin 75e User Manual

Enabling Protected Management Frame (PMF) or AKM with SHA256 Key Derivation

The Dolphin 75e supports AP Protected Management Frame (802.11w) authentication and encryption technology for data
communication, which adds protection against attacks targeted for wireless management frames. You can configure the
radio to restrict access to APs that meet the PMF standard and enable AKM with SHA256 Key Derivation for added
security.
To change the Wi-Fi Radio settings:
1. In the Apps list, touch Settings
2. Select Wi-Fi Radio Settings under the extras heading.
3. Modify the following settings to meet your security needs:
• Check the PMF Enabled box to turn On WLAN data communication using Protected Management Frame standards.
The default setting for this option is Off (no check).
• Check the PMF Require box to restrict AP selection for WLAN data communication to APs that meet PMF standards.
The default setting for this option is Off (no check).
• Check the AKM with SHA256 Key Derivation check box to use HMAC-SHA256 as the Authentication and Key
Management (AKM) suite to protect security. The default setting for this option is Off (no check).
4. Touch save .

Airplane Mode

See Turning Airplane Mode On/Off

Virtual Private Networks (VPN)

You can use a Virtual Private Network connection for additional security when connecting to your organization's network or
Internet via Wi-Fi. To establish a VPN connection you must first create a VPN profile on the terminal either by setting up a
workplace account (see page 5-7) using a profile supplied by your organization or by manually creating a profile. To manually
set up a VPN profile, you may need to do one of the following first:
• Ask your ISP or network administrator for the VPN connection settings for your organization (e.g., proxy server name,
server type, port, type of Socks protocol used, and your user name and password) if you do not already have the
information.
• Visit the Windows Phone Store to download an app for the VPN service you want to use. Check the service provider's
web site for any additional installation or set up requirements.

Adding a VPN Profile

To manually set up a VPN profile:
1. In the Apps list, touch Settings
2. Turn the VPN Status On
3. Touch add .
4. In the Server name or IP address box, input the server name or IP address of the VPN server.
5. In the Type box, choose either IKEv2, L2TP with IPSec or your VPN service provider for the type of VPN connection
you want to create.
The VPN service provider only appears in the options if you have already downloaded and installed the service provider
app. If needed, you can touch the link under the Type box to connect and download a SSL VPN app from the Windows
Store.
6. Touch the Connect using box. Select the security type required to connect to the VPN server and then input the
relevant information. The options listed change depending on the type of connection you selected in the previous step.
This setting may not be available for all connection types (e.g., if you used an SSL VPN app).
6 - 4
.
on page 1-11.
> VPN.
.