Optional Hardware (Not Supplied)
The following hardware may be required depending on which configuration you choose
to install. You can purchase these items from your local electronics or phone store.
2-Line Phone Cable (RJ14C)
If you are connecting a 2-line phone, you may
require a 2-line phone cable (24 AWG, RJ14C)
as defined in
Connecting a 2-Line Phone (with Two
Superlines) on page 14. Refer to
Technical
Information
on page 23 for the 2-line phone cable pin
configuration.
Pin #6
Pin #1
"T" Type Connector
If your home or office phone jacks are wired
internally with 4 wires, you may be able to connect
phones in other rooms to your SuperLine Adapter
using a "T" type connector as defined in
Optional
Configuration
"T" Type
on page 18. Refer to
Connector
on page 25 for the "T" type
connector pin configuration.
6