Table of Contents
Advertisement
Connecting Hardware Devices
Securing the lock lever
Post-Procedure After Installing/Removing the CPU Module
When a 3.06 GHz CPU module is installed, Steps 1 and 2 (installing the
exhaust fan duct) are not required.
1
Insert the exhaust fan duct into the server by sliding it toward the front of the server.
Attaching the exhaust fan duct (fan duct not installed on all models)
2
Lock the exhaust fan duct by turning the screw clockwise.
Locking the exhaust fan duct (fan duct not installed on all models)
3
Reinstall the exhaust fan module. For instructions, see
primary or redundant exhaust fan
on page 56.
CPU module
Removing and replacing a
82
Advertisement
Table of Contents
