Table of Contents
Advertisement
Chapter 4
Server Setup Tool
Before starting the Server Setup Tool (SST), make sure you have:
❖
The SST CD-ROM
❖
The Windows operating system CD-ROM
Starting SST
The SST may not work correctly with certain optional hardware devices (for
example, a SCSI card). If the SST does not work properly, remove the
optionally installed hardware device(s).
When the SST is running, do not turn off or reset the server, or remove the
Startup Disk or SST CD-ROM.
The SST cannot be used to install the operating system when hard disk
drives are connected to two or more disk controllers. To install the operating
system using the SST, one or more hard disk drives must be connected to
one controller.
1
Make certain that the monitor, keyboard, mouse, and all peripherals are correctly
connected.
2
Turn on the front power switch.
120
Advertisement
Table of Contents
