Table of Contents
Advertisement
Getting Started
Power requirements
To ensure proper grounding of the server and avoid a possible fire hazard, only
use the power cable provided with the server.
The EPS-R power supply unit has a 10 amp over-current protective circuit. Before
plugging the power cable into a wall outlet—particularly if the server is mounted in a
rack—make sure the AC power source and the over-current protector (circuit breaker
current rating) are sufficient to handle the requirements of the server and its connected
peripheral devices.
The current rating of the server is 4 amps. To ensure a continuous supply of power to the
server, Toshiba recommends the use of an uninterruptible power supply (UPS).
If you have questions about the wiring of your AC power source, consult an authorized
electrician.
Front of the server
System status
indicators
Front Panel Lock
Limited access
Upper door - The upper door allows access to the indicators, switches, device bay,
CD-ROM drive, and floppy disk drive.
Front door panel - The front door panel allows access to the hard disk drives and the side
panel lock.
Power (
)
Disk (
)
Fan fault (
)
Power unit fault (
)
Full access
No access
Power requirements
Upper door
Front door panel
23
Advertisement
Table of Contents
