Table of Contents
Advertisement
4. Register a defining equation for g(x).
– [Define f(x)/g(x)] > [Define g(x)]
• You can also use
information, see
5. Configure the number table range setting.
6. Press
.
• This displays the result in the number table screen.
• The number table generation operation causes the contents of
variable x to be changed.
Note
• On the number table screen, you can store the value in a cell to a variable. For
example, performing the following operation while the screen in step 6 is displayed
above will store -1 to variable A:
"Variables (A, B, C, D, E, F, x, y, z)" (page
Maximum Number of Rows in a Number Table
According to Table Type
You can configure number table screen settings to show columns for both
f(x) and g(x), or for either one of them. To set it, use the menu that
appears when you press
is displayed.
f(x)/g(x) ... Show both f(x)- and g(x)-columns (initial default setting)
f(x) ... Show only f(x)-column
g(x) ... Show only g(x)-column
(Screen immediately before you pressed
to register a defining expression. For more
"Defining Equation Registration" (page
– [Table Range]
((-))1
1
– [A=] > [Store]. For details about variables, see
35).
– [Table Type] while the number table screen
87
1
2
0
5
)
88).
Advertisement
Table of Contents
