Connecting Using Wand Emulation - Motorola Symbol LS9208 Product Reference Manual

9 - 2 Symbol LS9208/LS9208i Product Reference Guide

Connecting Using Wand Emulation

To perform Wand Emulation, connect the scanner to a portable data terminal, or a controller which collects the
wand data and interprets it for the host.
Portable data
terminal
Wand Emulation Connection
Figure 9-1
Connect the Wand Emulation interface cable to the rear of the scanner, as described in
1.
Cable on page
Connect the other end of the interface cable to the Wand port on the portable data terminal or controller.
2.
Scan the appropriate bar codes in this chapter to configure the scanner.
3.
Wand port
Interface cable
1-2.
Installing the Interface