User-Programmable Supplementals; Upc/Ean Supplemental Redundancy - Motorola Symbol LS9208 Product Reference Manual

User-Programmable Supplementals

If you selected a Supplemental User-Programmable option from
select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric
bar codes beginning on
Then select the 3 digits using the numeric bar codes beginning on

UPC/EAN Supplemental Redundancy

If you selected Autodiscriminate UPC/EAN Supplementals or one of the supplemental modes, this option
adjusts the number of times to decode a symbol without supplementals before transmission. The range is from 2 to
30 times. Motorola recommends five or above when decoding a mix of UPC/EAN symbols with and without
supplementals. The default is 20.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes beginning on
D-1. Single digit numbers must have a leading zero. If you make an error, or wish to change your selection, scan
Cancel on page D-4.
page D-1. Select User-Programmable Supplemental 2 to set a second 3-digit prefix.
Supplemental User-Programmable 1
Supplemental User-Programmable 2
UPC/EAN Supplemental Redundancy
Decode UPC/EAN Supplementals on page
page D-1.
Symbologies 11 - 13
11-9,
page