Table of Contents
Advertisement
Advanced use
This menu consists of 6 network profiles, a prefix can be added for each profile. If you add a prefix to a profile, this
prefix can be automatically added to the number being dialed.
E
: 0
XAMPLE
IS ADDED AS A
NUMBER DIALED WILL BE
Using the three last profiles you can enter the name of a profile, prefix and network selection. This is useful if you
have a fixed prefix for your service provider.
Dataport configuration
The system provides one standard RS 232 serial port to allow a computer to be connected for data transfer and
control purposes.
TIP
W
HEN CONNECTING TO A
Dataport 1
If you wish to connect a PC to Dataport 1, you must ensure that the PC and the system are identically
configured. The available settings are:
Dataport 1 supports 4 different modes:
Data mode
Provides a transparent data channel. This channel can be used for many different purposes such as file transfer,
TANDBERG Videoconferencing System
C
P
2
ALL
REFIX TO THE
ND PROFILE
012345678.
PC
THE CONNECTING CABLE MUST BE A STRAIGHT THROUGH
, ISDN. I
12345678
F YOU ENTER
RS232
application sharing and more. When using this
mode, it is necessary to have a TANDBERG
system at the far end.
Control mode
The control interface provided by the Dataport
supports a subset of the Hayes command set as
well as a comprehensive set of system specific
commands.
This mode maintains communication with the
Dataport's command interpreter at all times. All
features available from the hand-held remote
56
IN THE DIAL MENU AND SELECT
.
CABLE
'ISDN',
THE
Advertisement
Table of Contents
