Dataport Configuration - TANDBERG 880 User Manual

Advanced use
This menu consists of 6 network profiles, a prefix can be added for each profile. If you add a prefix to a profile, this
prefix can be automatically added to the number being dialed.
E : 0
XAMPLE IS ADDED AS A
NUMBER DIALED WILL BE
Using the three last profiles you can enter the name of a profile, prefix and network selection. This is useful if you
have a fixed prefix for your service provider.

Dataport configuration

The system provides one standard RS 232 serial port to allow a computer to be connected for data transfer and
control purposes.
W
NOTE
HEN CONNECTING TO A
Dataport 1
If you wish to connect a PC to Dataport 1, you must ensure that the PC and the system are identically
configured. The available settings are:
Dataport 1 supports 4 different modes:
TANDBERG Videoconferencing System
C P 2
ALL REFIX TO THE ND PROFILE
012345678.
PC
THE CONNECTING CABLE MUST BE A STRAIGHT THROUGH
, ISDN. I 12345678
F YOU ENTER
RS232
Data mode
Provides a transparent data channel. This channel can be used
for many different purposes such as file transfer, application
sharing and more. When using this mode, it is necessary to
have a TANDBERG system at the far end.
Control mode
The control interface provided by the Dataport supports a
subset of the Hayes command set as well as a comprehensive
set of system specific commands.
This mode maintains communication with the Dataport's
command interpreter at all times. All features available from the
hand-held remote control can be accessed through the
dataport.
82
IN THE DIAL MENU AND SELECT
.
CABLE
'ISDN',
THE