TANDBERG 1000 User Manual page 61

Test subsystem
You can test the different subsystems of your videoconferencing equipment.
Far End Loop (ISDN only)
SetLocal: This system will loop all incoming audio and video.
· The remote side will see its own video and hear its own audio.
· The local side will see and hear the remote side.
An on-screen indicator will indicate 'Local Loop'.
RequestRemote: A request will be sent to set the remote side in
loop.
· The remote side will see and hear the local side (varies depending
on implementation of loop functionality).
· The local side will see its own video and hear its own audio (if the
other side supports loop).
If 'Far End Loop' is set to 'RequestRemote' whilst in a call and the call is subsequently disconnected, 'Far End
Loop' will be set to 'Off'.
System Selftest
The system performs a check to determine internal hardware integrity. Test Network is useful when you want to
check if your network connection is active.
View current settings
This window will display all the system settings. Use the arrow keys to scroll through the list.
TANDBERG Videoconferencing System
61
Advanced use