Override - Tork DG100 Instructions Manual

DELETE: If you choose to delete a schedule, simply
modify the HOURS and MINUTES, until the time dis-
play reads --:--. This will occur after scrolling past
11 P.M. with the HOUR key and "59" with the MIN
key. Then press ENTER to delete the event.

OVERRIDE

In order to temporarily change the current ON or OFF
status of a load, simply press the override key. This
can only be done when the unit is in the RUN mode.
The load status will flash indicating that this is a
change from a scheduled event.
In order to cancel the override, press override key
again.
7