Setting The Unit; Select Am/Pm Or 24 Hour Military Format; To Set Clock - Tork DG100 Instructions Manual

SETTING THE UNIT

SELECT AM/PM OR
24 HOUR MILITARY FORMAT
Upon powering up the unit the LCD will display the
model number. The LCD will next display 12H which
is an automatic (AM/PM) format.
Press ENTER to keep AM/PM format or press HOUR
key to alter to 24 hour (Military) format and then
press ENTER.
Once the ENTER is pressed, unit goes to RUN mode
You can recognize that the unit is in the RUN mode
when the real time (including seconds) is displayed.
SU
AM
OFF
NOTE: Once you select and ENTER the above for-
mat (either AM/PM or 24 hour military), you can not
alter it without removing all power to the unit by dis-
connecting the battery and line power.

TO SET CLOCK

Press MODE key; display shows CLK.
SU
AM
CLK
3