Table of Contents
Advertisement
Time-outs
The Global Icon
Using Slidebars and
Other Controls
From presentation level, press
within a topic. Press
'
If a slidebar, menu or message is displayed you have limited time in which to make a
keypad entry before the projector returns to presentation level and the graphic
disappears. These time-outs may vary depending on what is displayed.
'
Menu options that include this icon apply universally to any incoming signal.
'
Most of the function menus allow you to change settings by using slidebars,
checkboxes, and pull-down lists. To select a slidebar, toggle a checkbox status or view
a pull-down list, do one of the following within the function menu:
•
Enter the menu option number corresponding to the setting you wish to change
(for example, press
menu).
•
Or move the highlight to the option desired and press
•
Or move the highlight to the option desired and press
immediately.
•
Or bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation (NOTE: applies only to options having
their own key, such as Contrast, Brightness, Gamma, etc.).
•
For "blind" access, hide the entire menu system (see OSD key, above) and/or
direct slidebars activated by their own key (such as Contrast, Brightness, etc.).
Control by using the proper keypress or numerical sequence of key presses.
•
When using PIP images, use
Figure 3.5. Context-sensitive Help
to access general Help Topics. Scroll as necessary
Help
or
Exit
to return to your presentation.
Help
Figure 3.6. Accessing General Help Topics
to select Vertical Stretch in the Size & Position
1
3
key to adjust the other image.
Christie DS+60/DW30/Matrix 3000 User's Manual
Section 3: Operation
(Enter).
to adjust
3-11
Advertisement
Table of Contents
