Table of Contents
Advertisement
Section 3: Operation
IR Remote
*These are toggle keys, which require you to press and hold or press twice or press and use the
up/down arrow keys. NOTE: To turn the OSD off you must press
3-4 Christie DS+60/DW30/Matrix 3000 User's Manual
'
The IR remote controls the projector by way of wireless communications from a
battery-powered infrared (IR) transmitter. Use the IR remote the same way you would
use a remote control supplied with a TV or VCR. When making key presses, direct the
keypad either toward the screen or toward the front or rear of the projector. One of the
two IR sensors on the projector will detect the signals and relay the commands for
internal processing.
OSD
Figure 3.3. IR Remote
and
.
Advertisement
Table of Contents
