Changing The Main Fuse - KTM Freeride 250 R Owner's Manual

15 ELECTRICAL SYSTEM
15.4

Changing the main fuse

Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the seat.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
Finishing work
–
Install the battery.
–
Install the shock absorber.
–
Lock the seat. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Fold the seat up. (
Main work
–
Remove protection cap
B01684-10
–
Remove the faulty main fuse
Info
A defective fuse is indicated by a burned-out fuse wire
A reserve fuse
–
Install a new main fuse.
Fuse (58011109110) (
–
Check that the electrical equipment is functioning properly.
B01685-10
Tip
Insert the spare fuse so that it is available if needed.
–
Mount the protection cap.
Finishing work
–
Lock the seat. (
3 months
( p. 71)
( p. 44)
p. 45)
p. 45)

.

.

is located in the starter relay.
p. 96)
p. 45)
p. 37)

.
73