Changing The Gear Oil; Draining The Gear Oil - KTM Freeride 250 R Owner's Manual

18 SERVICE WORK ON THE ENGINE
18.3

Changing the gear oil

18.4

Draining the gear oil

Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the gear oil while the engine is warm.
–
Drain the gear oil.
400721-01
–
Fill in gear oil.
400722-01
Preparatory work
–
Park the motorcycle on a level surface.
–
Place a suitable container under the engine.
Main work
–
Remove the gear oil drain plug with magnet
–
Let the gear oil drain fully.
–
Thoroughly clean the gear oil drain plug with magnet.
–
Clean the sealing surface on the engine.
–
Mount and tighten gear oil drain plug with magnet
Guideline
Gear oil drain plug with magnet
B01671-10
( p. 87)
( p. 88)

M12x1.5
.

and seal ring.
20 Nm
(14.8 lbf ft)
87