6
CONTROLS
6.14
Closing the filler cap
6.15
Fuel tap
6.16
Choke
6.17
Shift lever
Main work
–
Replace the filler cap and turn clockwise until the release button
place.
Info
Run the fuel tank breather hose
B01662-11
Finishing work
–
Lock the seat. (
The fuel tap is on the left side of the fuel tank.
Using tap handle
carburetor.
Possible states
Fuel supply closed OFF – Fuel cannot flow from the fuel tank to the carburetor.
•
Fuel supply open ON – Fuel can flow from the fuel tank to the carburetor. The fuel
•
tank empties down to the reserve level.
Fuel reserve supply open RES – Fuel can flow from the fuel tank to the carburetor.
•
The fuel tank empties completely.
B01660-10
Choke
is fitted on the left side of the carburetor.
Activating the choke function frees a drill hole in the carburetor through which the
engine can draw extra fuel. This results in a richer fuel-air mixture, which is needed
for a cold start.
Info
If the engine is warm, the choke function must be deactivated.
Possible states
Choke function activated – The choke lever is pulled out to the stop.
•
B01664-10
Choke function deactivated – The choke lever is pushed in to the stop.
•
Shift lever
401950-10
p. 45)
on the fuel tap, you can open or close the supply of fuel to the
is mounted on the left side of the engine.
without kinks.
15
locks in