Sharp AR-280 Service Manual page 81

Back surface resist adjustment
Back surface resist adjustment by the SB resist adjustment plate
(1) Loosen the fixing scrw.
(2) If the copied image is as shown in 1, shift and adjust the adjust-
ment plate in the direction of A.
If the copied image is as shown in 2, shift and adjust the adjust-
ment plate in the direction of B.
Fixing screw
(Set document)
Front surface of document
(Copy)
Copy 1
Copy 2
SB resist
adjustment plate
Float side plate F
B
Skew adjustment
Skew adjustment by the upper guide and the lower guide
(1) Loosen four fixing screws.
(2) If the copied image is as shown in 1, shift and adjust the adjust-
ment plate in the direction of A. If the copied image is as shown in
2, shift and adjust the adjustment plate in the direction of B.
B
(Set document)
(Copy)
Copy 1
Copy 2
6 – 31
Fixing screws
F-side plate adjustment scale line
A
Front surface
of document
A
7/13/2000