Sharp AR-280 Service Manual page 100

14
14 - 0
Purpose Clear/Cancel (Trouble etc.)
Function Used to cancel the self diag U1/LOC/U2/PF troubles.
(Purpose)
Item Trouble
Operation/ When the [EXECUTE] key is pressed, the troubles ex-
Procedure cluding U1/LCC/U2/PF are canceled and the display re-
turns to the simulation main code entry screen.
After this simulation is canceled, the machine resumes operation.
15
15 - 0
Purpose Clear/Cancel (Trouble etc.)
Function Used to cancel the self diag U4 - 09/20/21/22 (large ca-
(Purpose) pacity tray) trouble.
Section Paper transport
Item Trouble
Operation/ When the [EXECUTE] key is pressed, the U6
Procedure (09/20/21/22) (LCC) trouble is canceled and the display
returns to the simulation main code entry screen.
After canceling this simulation, the machine resumes
operation.
16
16 - 0
Purpose Clear/Cancel (Trouble etc.)
Function Used to cancel the self diag U2 trouble.
(Purpose)
Item Trouble
Operation/ When the [EXECUTE] key is pressed, the U2 trouble is
Procedure canceled and the display returns to the simulation main
code entry screen.
After this simulation is canceled, the machine resumes
operation.
7/13/2000
Error
Error
7 – 19
17
17 - 0
Purpose Clear/Cancel (Trouble etc.)
Function Used to cancel copy inhibition by the host computer
(Purpose) during the self diag PF.
Section Communication unit (TEL/LIU/MODEM etc.)
Item Trouble
Operation/ When the [EXECUTE] key is pressed, the PF trouble is
Procedure canceled and the display returns to the simulation main
code entry screen. After this simulation is canceled, the
machine resumes operation.
21
21 - 1
Purpose Setting
Function Used to set the maintenance cycle.
(Purpose)
Item Specifications
Operation/ When the maintenance cycle is selected with the key,
Procedure the selected key is highlighted. The maintenance mes-
sage is displayed in every selected cycle. When FREE
is selected, the maintenance display is not shown.
(AR-250/280/281/285/286/287/335/336/337)
Default: 80K
Error
Counter