Sharp AR-280 Service Manual page 129

(AR-250/280/281/285/286/287/335/336/337)
(AR-405/407)
(AR-501/505/507)
51 - 3
Purpose Setting
Function Used to set the clutch OFF time. (AR-507 Europe and
(Purpose) U.K. only)
Item Operation
Operation/ When this simulation is executed, the current set value
Procedure is displayed.
At that time, the set value can be changed with [­] key and [¯] key.
When [­], [¯], and [OK] keys are pressed, the current set value is
stored in the EEPROM.
TRC2
TRC1H
(Europe/U.K.)
51 - 8
Purpose Setting
Function Used to set Enable/Disable of the drum separation
(Purpose) pawl drive solenoid (PSPS) operation for each paper
feed section (Manual paper feed, cassette 1, cassette
2, duplex module, desk cassette 1, desk cassette 2,
desk cassette 3, LCC) (AR-501/505/507)
Section Image process
Item Operation
Operation/ 1. When this simulation is executed, the current set
Procedure value is displayed.
At that time, the item A-H can be selected with [­], [¯] keys and
the set value can be changed with the 10-key.
2. When [­] and [¯] and OK keys are pressed, the currently set value
is stored in the EEPROM.
A Manual paper feed
B Cassette 1
C Cassette 2
D Duplex module
E Desk cassette 1
F Desk cassette 2
G Desk cassette 3
H LCC
7 – 48
Destination Default
Europe 80
U.K. 80
Europe 60
U.K. 60
Default
0: Enable/1: Disable 0: Enable
0: Enable/1: Disable 0: Enable
0: Enable/1: Disable 0: Enable
0: Enable/1: Disable 0: Enable
0: Enable/1: Disable 0: Enable
0: Enable/1: Disable 0: Enable
0: Enable/1: Disable 0: Enable
0: Enable/1: Disable 0: Enable
7/13/2000