Sharp AR-280 Service Manual page 133

(AR-501/505)
All must be set to "5."
(AR-507)
All must be set to "5."
61 - 4
Purpose Adjustment
Function Used to adjust the scanner (exposure) laser power (ab-
(Purpose) solute value) in the printer mode. (For Photoconductor
type B)
Section Laser (Exposure)
Item Operation
Operation/ (AR-280/285/335)
Procedure
Set all the values to the default value 16.
(AR-281/286/336)
Set all the values to the default value 7.
(AR-287/337)
Set default value 8.
(AR-407)
Set default value 6.
(AR-405/501/505)
Set all the values to the default value 5.
(AR-507)
Set default value 5.
62
62 - 1
Purpose Setting/Data clear
Function Used to format the hard disk. (Models with the hard
(Purpose) disk installed only)
Section Memory
Item Others
Operation/ 1. Press the [EXECUTE] key.
Procedure The display for reconfirmation to clear or not is
shown.
2. Select YES/NO to format.
YES: Formatting is performed.
NO: Formatting is not performed.
3. Press YES.
Formatting is performed. After completion, the result is shown with
END.
This procedure is necessary when the hard disk is replaced.
If NG is displayed, it means a hard disk trouble.
7 – 52 7/13/2000