Sharp AR-280 Service Manual page 103

Operation/ This data is used to check the use frequency of each
Procedure paper feed section, According to this data, mainte-
nance is performed.
22 - 10
Purpose Operation data output/Check (Display/Print)
Function Used to check the system configuration (option, internal
(Purpose) hardware).
Item Specifications
Operation/ This simulation allows to check the system configura-
Procedure tion.
The devices and the option units which are installed are
displayed with the model names or size, etc.
(AR-230/280/285 series)
(AR-330/335 series)
(AR-250/281/286/287/336/337/405)
(AR-501/505/507 series)
nnnnnnnn : Counter vlaue
Options
7 – 22
22 - 12
Purpose Operation data output/Check (Display/Print)
Function Used to check the misfeed positions and the number of
(Purpose) misfeed at each position. (When the number of misfeed
is considerably great, is can be judged as necessary for
repair.)
Section SPF/ADF/RSPF/RADF
Item
Operation/
Procedure
22 - 19
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to display the scanner mode counter.
(Purpose)
Item Counter
Operation/
Procedure
24
24 - 1
Purpose Data clear
Function Used to clear the misfeed counter, the misfeed history,
(Purpose) the trouble counter, and the trouble history. (The count-
ers are cleared after completion of maintenance.)
Item Counter
Operation/ 1. Select the counter to be cleared.
Procedure
MACHINE: Machine JAM counter
DF: SPF/RADF/ADF JAM counter
TROUBLE: Trouble counter
(When selected, it is highlighted.)
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
After completion of maintenance, the above counter is cleared
Mis-feed
nnnnnnnn : Counter value
7/13/2000