Sharp AR-280 Service Manual page 102

22 - 5
Purpose Others
Function Used to check the ROM version of each unit (section).
(Purpose)
Item Software
Operation/ The ROM version of each section can be checked.
Procedure
If there is any problem in the software, check the ROM
version of each section with this simulation and replace
with a new version if necessary.
22 - 6
Purpose Operation data output/Check (Display/Print)
Function Used to output the list of the setting and adjustment
(Purpose) data (simulations, FAX soft switch, counters).
Item Data
Operation/ When installing or servicing, execute this simulation to
Procedure print and store the adjustment values and setting data
for use in the next servicing. (Memory trouble, PWB re-
placement, etc.)
In this case, the print conditions can be set optionally.
1. Select the setup item.
(The selected item is highlighted.)
2. Set the item and conditions with the 10-key pad.
3. Press the [EXECUTE] key to print various data.
(AR-250/280/281/285/286//335/336/405/501/505)
A: Print out items (Contents)
1: All adjustment values and setup data
2: All counter data
3: FAX soft switch setup data (Japan only)
4: Print density adjustment data
5: Adjustment and setup data of the other simulations
B: Paper feed mode
1: Manual paper feed
2: Upper paper feed tray
3: Lower paper feed tray
4: Desk upper paper feed tray
5: Desk middle paper feed tray
6: Desk lower paper feed tray
7: Large capacity paper feed tray
7/13/2000
Adjust/Setting data
7 – 21
(AR-287/337/407/507)
A: Paper feed mode
1: Manual paper feed
2: Upper paper feed tray
3: Lower paper feed tray
4: Desk upper paper feed tray
5: Desk middle paper feed tray
6: Desk lower paper feed tray
7: Large capacity paper feed tray
22 - 7
Purpose User data output/Check (Display/Print)
Function Used to display the key operator code. (This simulation
(Purpose) is used when the customer forgets the key operator
code.)
Item Data
Operation/
Procedure
22 - 8
Purpose Operation data output/Check (Display/Print)
Function Used to check the number of use of the staple, the
(Purpose) ADF, RADF, SPF, and scanning.
Item Counter
Operation/ This data is used to check the use frequency of each
Procedure section. According to this data, maintenance is exe-
cuted.
22 - 9
Purpose Operation data output/Check (Display/Print)
Function Used to check the number of use of each paper feed
(Purpose) section. (the number of prints)
Section Paper transport
Item Counter
User data
nnnnn : Key operator code
nnnnnnnn : Counter value