2
1
2.5
COnneCting tO pOWer supply Mains
The unit has a mains cable and a wall plug (Note! Minarc 151 (110 V) is
delivered without a plug). You can find fuse and cable sizes in the end of
these instructions in Technical data.
2.6
filler Materials anD equipMent
See also 2.4. Main components. You can use all electrodes intended for
welding with DC. Suitable electrode sizes for the unit are listed in the end of
these instructions in Technical data.
1.
Use welding specifications given on electrode package.
2.
Check that you have selected the correct welding process before starting
to weld.
3.
Check that welding cable and earth cable connections are tight. If a
connection is slack, it will result in voltage drop that will cause the
connection to heat.
4.
Mount the electrode firmly in holder.
3
4
5
6
7
8
EN
9