Kemppi Minarc 150 Operating Manual page 8

• Always store the machine in a dry and clean space.
• Protect the machine from sand and dust during use and in storage.
• The recommended operating temperature range is -20 to +40 °C. The
• Place the machine so that it is not exposed to hot surfaces, sparks or
• Make sure the airflow to and from the machine is unrestricted.
• EMC classification of this product is class A in accordance with
WARNING:
where the electrical power is provided by a public low-voltage supply system. In
those locations it may be difficult to ensure the electromagnetic compatibility
due to conducted and radiated disturbances.
• Arc welding equipment always cause electromagnetic disturbance.
gas bottles and pneumatic devices
• Adhere to the instructions for handling pneumatic devices and gas
• Make sure that gas bottles are used and stored in properly ventilated
• Before use, make sure that the gas bottle contains gas suitable for the
• Always fix the gas cylinder securely in an upright position, against a
EN
• Never move a protective gas bottle when the flow adjuster is in place.
• Always close the gas cylinder valve after use.
Disclaimer
While every effort has been made to ensure that the information contained
in this guide is accurate and complete, no liability can be accepted for any
errors or omissions. Kemppi reserves the right to change the specification of
the product described at any time without prior notice. Do not copy, record,
reproduce or transmit the contents of this guide without prior permission
from Kemppi.
6
machine's operation efficiency decreases and it becomes more prone to
damage if used in temperatures in excess of 40 °C.
spatter.
electromagnetic compatibility standards CISPR 11 and IEC 60974-10, and
therefore the product is designed to be used in industrial environment
only.
This class A equipment is not intended for use in residential locations
To minimize the harmful effects of this, use the equipment strictly
according to the operating manual and other recommendations.
bottles.
spaces. A leaking gas bottle may replace the oxygen in the inhaled air,
causing suffocation.
intended purpose.
cylinder wall rack or purpose-made cylinder cart.
Put the valve cover in place during transportation.