Kemppi Minarc 150 Operating Manual page 6

• Never wear the device on the shoulder during welding and never
• Do not expose the machine to high temperatures, as heat may cause
• Keep the torch cable and earthing cable as close to each other as
• Do not wrap the cables around the body.
• In environments classified as dangerous, only use S-marked welding
spatter and fire safety
• Welding is always classified as hot work, so pay attention to fire safety
• Remember that fire can break out from sparks even several hours after
• Protect the environment from welding splatter. Remove flammable
• In special welding jobs, be prepared for hazards such as fire or explosion
• Never direct the spark spray or cutting spray of a grinder toward the
• Beware of hot objects or splatter falling on the machine when working
• Welding in flammable or explosive sites is absolutely forbidden.
EN
general electric safety
• Only connect the welding machine to an earthed electric network.
• Note the recommended mains fuse size.
• Do not take the welding machine inside a container, vehicle or similar
• Do not place the welding machine on a wet surface and do not work on
• Do not allow the mains cable to be directly exposed to water.
• Ensure cables or welding torches are not squashed by heavy objects and
4
suspend it by the carrying strap during welding.
damage to the machine.
possible throughout their length. Straighten any loops in the cables. This
minimises your exposure to harmful magnetic fields, which may interfere
with a pacemaker, for example.
devices with a safe idle voltage level. These work environments include,
for example, humid, hot or small spaces where the user may be directly
exposed to the surrounding conductive pieces.
regulations during welding and after it.
the welding work is completed.
materials, such as flammable fluids, from the welding vicinity and supply
the welding site with adequate fire fighting equipment.
when welding container type work pieces.
welding machine or flammable materials.
above the machine.
work piece.
a wet surface.
that they are not exposed to sharp edges or a hot work piece.