Canon imageRUNNER Advance 4251 Basic Operation Gude page 87

Hide thumbs Also See for imageRUNNER Advance 4251:
Table of Contents

Advertisement

Insert a new staple cartridge into the staple case.
3
• Do not remove the seal that holds the staples together before you place the staple cartridge into the
staple case.
• Only one staple cartridge can be inserted at a time.
• Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.
Attach the staple case.
4
When closing the front cover of the fi nisher, be careful not to get your fi ngers caught, as this may
result in personal injury.
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition
the staples.
2
1
3
1. Insert a new staple cartridge.
2. Press the spring-loaded
case down until it clicks into
place.
3. Remove the seal holding the
staples together, by pulling
it straight out.
1. Gently push the staple case
back into the fi nisher and
push down fi rmly until it is
securely in place.
2. Close the front cover of the
fi nisher.
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents