Canon imageRUNNER Advance 4251 Basic Operation Gude page 81

Pull out the staple case, holding it by the green tab.
2
Pull out the empty staple cartridge from the staple case.
3
Insert a new staple cartridge into the staple case.
4
• Do not remove the seal that holds the staples together before you place the staple cartridge into the
staple case.
• Only one staple cartridge can be inserted at a time.
• Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.
1
2
1
2
1
3
1. Press the areas indicated by
PUSH on both sides of the
staple case.
2. Once you have released the
spring-loaded case, pull out
the staple cartridge.
1. Insert a new staple cartridge.
2. Press the spring-loaded
case down until it clicks into
place.
3. Remove the seal holding the
staples together, by pulling
it straight out.
81