Canon imageRUNNER Advance 4251 Basic Operation Gude page 25

3
Setting the Number of Copies
Enter the number of copies.
Press the numeric keys to enter the desired copy quantity (1 to 999).
If you make a mistake when entering values, press
(Clear) enter the correct value.
The specifi ed copy quantity appears on the screen,
as shown below.
4
Start Copying
After specifying the settings, press
Press (Start).
If the following screen appears, press
scan the next original. After all of the originals are
scanned, press [Start Copying].
When copying is complete, remove your originals.
(Start).
(Start) to
25