Canon imageRUNNER Advance 4251 Basic Operation Gude page 177

30
Can I print on envelopes?
Load the envelopes to print on in
the multi-purpose tray.
Setting procedure:
■
Take about five envelopes, fan them,
and then stack them together. Place the
envelopes on a level surface, and press
all the way around the envelopes by
hand to remove any air inside. Open the
multipurpose tray, adjust the slide guides,
and then load the envelopes, as shown
below.
1. Load the envelopes.
2. Press [Envelope]  select the desired
envelope type  press[OK].
3. Press [Next]  [OK]  [OK].
4. Press (Start).
Nagagata 3
Kakugata 2
ISO-C5
Feeding Direction
Additional Information
For more information, see e-Manual > Basic
Operations.
If the optional Envelope Feeder
Attachment-D1 is attached to the machine,
you can load envelopes in the paper drawer
with the Envelope Feeder Attachment-D1
attached.
31
What are the types of paper that I
can use?
You can load and print on the
following paper:
Paper Drawer 1
Weight: 16 lb bond to 34 lb bond (60 to 128
2
g/m )
Size: LGL, LTR, LTRR, STMTR, EXEC, and
Custom Size (5 1/2" x 7 1/8" to 11
3/4" x 15 3/8" (139.7 mm x 182 mm
to 297 mm x 390 mm))
Type: Plain 1, Plain 2, Recycled, Color,
Heavy 1, Heavy 2, Pre-Punched
Paper Drawer 2, 3, and 4
Weight: 16 lb bond to 34 lb cover (60 to
128 g/m 2 )
Size: 11" x 17", LGL, LTR, LTRR, STMTR,
EXEC, Envelope (No. 10 (COM10),
Monarch, DL, ISO-C5)*, and Custom
Size (5 1/2 " x 7 1/8" to 11 3/4" x 17"
(139.7 mm x 182 mm to 297 mm x
431.8 mm))
Type: Plain 1, Plain 2, Recycled, Color,
Heavy 1, Heavy 2, Pre-Punched,
Envelope*
* Envelope is available only when the
Envelope Feeder Attachment-D1 is
attached to the Paper Drawer 2.
Multi-Purpose Tray
Weight: 14 lb bond to 80 lb cover (52 to
220 g/m 2 )
Size: 11" x 17", LGL, LTR, LTRR, STMTR,
EXEC, Envelope (Yougatanaga 3,
Nagagata 3, Kakugata 2, No. 10
(COM10), Monarch, DL, ISO-C5),
Custom Size (3 7/8" x 5 7/8" to 11
3/4" x 17" (99 mm x 148 mm to 297
mm x 431.8 mm)), and Free Size (3
7/8" x 5 7/8" to 11 3/4" x 17" (99 mm
x 148 mm to 297 mm x 431.8 mm))
Type: Thin, Plain 1, Plain 2, Recycled,
Color, Heavy 1, Heavy 2, Heavy
3, Heavy 4, Bond, Tracing
Transparency *2 , Pre-Punched,
Labels, Envelope
*1 Some types of tracing paper cannot be
used.
*2 Use only LTR transparencies made
especially for this machine.
Q&A
*1
,
177