Mfc-101 Midi Receive Channel; Mfc-101 Receive Program Change; Mfc-101 Program Change Map - Fractal Audio MFC-101 Owner's Manual

Fractal Audio Systems MFC-101 Manual

12.4.3 MFC-101 MIDI Receive Channel

EDIT : MIDI : PAGE
MFC-101 MIDI Receive ("Rx") Channel is used to specify the channel on which the MFC-101 will respond to MIDI program
change messages received at its MIDI IN port, if this feature is enabled (see below)

12.4.4 MFC-101 Receive Program Change

EDIT : MIDI : PAGE
MFC-101 Receive ("Rx") Program Change is used to enable or disable incoming MIDI Program change response on the MFC-
101. Enabling this setting allows other devices to remote control the MFC-101 by loading its presets, which in turn send the
usual MIDI instructions to the MIDI OUT port as if they had been selected via footswitch.

12.4.5 MFC-101 Program Change Map

EDIT : MIDI : PAGE
The MFC-101 Program Change Map is used to create a custom relationship between incoming MIDI program change messages
and MFC-presets. This makes it possible to recall different MFC-101 presets depending on the MIDI program change number
received.
PARAMETER footswitches move between Incoming Program Change and MFC Preset Number parameters.
NOTE: The range of MFC-101 Preset Numbers shown will be affected by the MFC-101 Display Offset (12.5.3)
NOTE: Receive Program Change (12.4.4) must be enabled for the MFC-101 to respond at all to Program Changes.
Doc v1.0.1
(3x)
(4x)
(5x)
MIDI MENU REFERENCE
47