Instant Access Switches; Axe-Fx Ia Switches; Figure 5-1: Default Ia Switch Assignments In Axe-Fx Mode - Fractal Audio MFC-101 Owner's Manual

INSTANT ACCESS SWITCHES

5 INSTANT ACCESS SWITCHES
Instant Access (IA) Switches are typically used like traditional stompboxes to turn effects on or off, but with the
deep MIDI capabilities of the MFC-101 there are many other creative possibilities for their use. The number of IA
footswitches is determined by the global Bank Size (see section 4.1 on p. 13). Each numbered IA Switch (1-17) is
always located at the footswitch with the same number. The MFC-101 software provides access to additional IAs
(nos. 18–41) reserved for future use. IA switch settings are global across all Presets, Banks, and Songs.

5.1 Axe-Fx IA Switches

In Axe-Fx mode, IA Switches can be set up to control many functions. Default settings are shown below:
You can freely change the above settings in the MIDI menu:
1. Press EDIT footswitch to enter EDIT MODE.
2. Press MIDI footswitch to select the MIDI menu.
3. Press PAGE footswitch 6x to get to the IA Axe-Fx Functions screen:
4. Press the INCR or DECR footswitch to select an IA Switch to edit by its number.
5. Press PARAMETER to move the cursor to the Axe-Fx Functions list.
6. Press and/or hold the INCR or DECR footswitch to select an Axe-Fx function from the list.
See the table below for a complete list of available functions.
7. Press PARAMETER to return to the first cursor position if you want to repeat this process
from step 4 to set up additional switches, or press EXIT to return to PERFORMANCE MODE.
16

Figure 5-1: Default IA Switch Assignments in Axe-Fx Mode.

Fractal Audio Systems MFC-101 Manual
Doc v1.0.1