Songs & Sets; Entering Song Or Set Mode - Fractal Audio MFC-101 Owner's Manual

SONGS & SETS
9 SONGS & SETS
SONG MODE and SET MODE are counterparts to PRESET MODE. Remember that all of these share the same set
128 MFC-101 presets, and that AXE-FX MODE runs independently of all three. Here's a review of the differences
between Performance Operating Modes:
MODE PRESETS
PRESET MODE: 128 Presets total are arranged in strict
numerical order
number of preset footswitches per Bank
is set by the global Bank Size:
1, 5, 10 or 15.
SONG MODE: Uses the same 128 presets as PRESET
MODE, but arranged as desired on the
preset footswitches for each of 100
Songs. The number of presets which can
be added to each song is 15. If the global
Bank Size is lower, some will be
inaccessible.
SET MODE {1-10}: Uses the same Songs as SONG MODE,
and therefore their same Presets.

9.1 Entering Song or Set Mode

To change the operating mode:
1. Press the EDIT footswitch to enter EDIT MODE
2. Press SETUP footswitch to select the SETUP menu
3. Press PAGE 1x to arrive at the Operating Mode screen:
4. Press the INCR or DECR footswitches to select PRESET, SONG, or SET XX, where XX is the
number of the Set which will be in effect until the operating mode is changed.
(A sample display showing SET and the selected number is shown below).
5. Press EXIT to return to PERFORMANCE MODE.
1
MFC-101 presets are numerically sequenced across banks in PRESET MODE, but the actual MIDI Program Change commands
sent may be modified freely. See Presets and Program Changes on p. 22
30
1
across Banks. The
Fractal Audio Systems MFC-101 Manual
UP/DOWN FOOTSWITCHES
Up/Down footswitches step through all Banks in strict
numerical order. The number of banks depends on the
global Bank size:
128, 26, 13 or 9.
Up/Down footswitches step through all 100 Songs in
strict numerical order.
The Up/Down footswitches step through any 50 Songs,
arranged as desired in the current Set specified as the
Operating Mode.
Doc v1.0.1