Saeco Syntia Service Manual page 33

Hide thumbs Also See for Syntia:
Table of Contents

Advertisement

SYNTIA
pos.
lev.
knob
L3
pos.
lev.
symbol
knob
L4
pos.
lev.
symbol
knob
L5
Saeco International Group
symbol
status
MEMO
MEMO
MEMO
as it is
pressed
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
status
MEMO
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
status
press
Initial LED status at level 3
The brewing unit goes into the "Work" position and
the button
MEMO
strain is excessive. Check operation of the gearmo-
MEMO
tor and microswitch of the gear (broken or inserted
incorrectly).Check the JP16 wiring
The brewing unit goes into the "Home" position
MEMO
and the button
iturns
off as
on if strain is excessive. Check operation of the
soon
gearmotor and microswitch of the gear (broken or
inserted incorrectly). Check the JP16 wiring
press
Initial LED status at level 4
The water is dispensed from the steam pipe and
blinks
The symbol
MEMO
dispensed. Verify checks at the pump, pump wiring
MEMO
and/or connection on the CPU/Power card(JP24),
turbine, turbine wiring and/or connection on the
CPU/Power card(JP5).
To check correct passage of water from the cof-
fee duct, return to level 2 (brewing unit functional
check), put the unit in the "Work" position, and the
knob will blink in the coffee position
boiler
press
If the symbol
interrupted. Check the boiler sensor wiring and/or
the connection on the CPU/Power card (JP13)
If the the current absorption is KO, check the
power wiring and/or the connection on the CPU/
Power card (JP17-3)
MEMO
The coffee grinder is enabled by pressing the
"AROMA" button, and the button
.If this does not occur and the symbol
on, check the sensor and/or the coffee grinder
motor, the wiring of the sensor and/or the connec-
tion on the CPU/Power card (JP2), the wiring of
the coffee grinder motor and/or the connection on
the CPU/Power card (JP8)
Rev.01 February 2010
05 SERVICE MODE
function
turns on . The symbol
turns on . The symbol
MEMO
function
turns on if water is not
function
appears, the boiler sensor is
MEMO
turns on if
turns
MEMO
starts to blink
turns
Page 6 / 07

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents