Saeco Syntia Service Manual page 30

SYNTIA
pos.
lev.
knob
L3
WORK=Y
HOME=N
WORK=Y
HOME=N
WORK=N
HOME=N
WORK=N
HOME=N
WORK=N
HOME=N
WORK=N
HOME=Y
WORK=N
HOME=N
WORK=N
HOME=N
WORK=N
HOME=N
Saeco International Group
display key
BU PAGE
CUR= 0
BU PAGE
CUR= 178
BU PAGE
CUR= 497
BU PAGE
CUR= 203
BU PAGE
CUR= 337
BU PAGE
CUR= 193
BU PAGE
CUR= 497
BU PAGE
CUR= 203
BU PAGE
CUR= 337
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
function
Initial status with no keys pressed
CUR= --- indicates the gearmotor
Bring the absorption; this value must be:
unit to the WITHOUT BREWING UNIT INSERTED
"WORK" lower than 200mA
position WITH BREWING UNIT INSERTED
lower than 300 mA
ERROR: WORK display shows "N", display from green
change to red. Check gearmotor gear microswitch
(broken or inserted incorrectly) or motor (locked).
Check JP16 wiring.
ERROR: (WITHOUT UNIT inserted) If the gearmotor
motor current absorption is higher than 200mA,
display from green change to red. Check gearmotor
unit and/or motor
ERROR: (WITH UNIT inserted) If the gearmotor motor
current absorption is higher than 300mA, display from
green change to red. Check gearmotor unit and/or
motor
CUR= --- corresponds to the
gearmotor absorption; this value must
Bring the unit be:
to the "HOME" WITHOUT UNIT INSERTED
position lower than 200mA
WITH UNIT INSERTED
lower than 300 mA
ERROR: HOME display shows "N", display from green
change to red: check gearmotor gear microswitch
(broken or inserted incorrectly), gearmotor motor
(locked), wiring JP16
ERROR: (WITHOUT UNIT inserted) Gearmotor motor
current absorption higher than 200mA, display from
green change to red: check gearmotor unit and/or
motor
ERROR: (WITH UNIT inserted) Gearmotor motor
current absorption higher than 300mA, display from
green to red: check gearmotor unit and/or motor
Rev.01 February 2010
05 SERVICE MODE
notes
Page 3 / 07