Adjusting The Scanner Leading Edge Registration - Olivetti d-Copia 18MF Service Manual

(6) Adjusting the scanner leading edge registration

Perform the following adjustment if there is regular error between the leading edges of the copy image and original.
U034
U066
(P. 1-6-41)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter 066 using
up/down cursor keys.
Press the enter key.
Press the system menu/counter key.
Place an original and press
the start key to make a test copy.
(Printing cannot be stopped until the
preset number of sheets is printed.)
Is the scanner
leading edge registration
Press the back key to
exit maintenance mode.
1-6-46
U071
(P. 1-6-50)
Start
No
correct?
Yes
End
Service Manual
Leading edge registration
Original
Press the enter key.
The new setting
is stored.
Press the system menu/counter key.
For copy example 1, decrease
the value using the left cursor key.
For copy example 2, increase
the value using the right cursor key.
Setting range : –32 to +32
Initial setting: 6
Changing the value by 1 moves
the leading edge by 0.254 mm.
Copy
Copy
example 2
example 1
Figure 1-6-57
Y104230-6