Removing The Exposure Lamp - Olivetti d-Copia 18MF Service Manual

1-6-13 Removing the exposure lamp

1. Remove the ISU unit (see page 1-6-32).
2. Remove two connectors from the inverter
PWB.
3. Remove the screw and then remove the
inverter PWB.
4. While unhooking the hook and then slide the
exposure lamp mount.
1-6-34
Figure 1-6-40 Removing the inverter PWB
ISU unit
Figure 1-6-41 Removing the exposure lamp mount
Service Manual
ISU unit
Inverter PWB
Connectors
Exposure lamp mount
Screw
Hook
Y104230-6