Adjusting The Dp Center Line - Olivetti d-Copia 18MF Service Manual

(12) Adjusting the DP center line

Perform the following adjustment if there is a regular error between the centers of the original and the copy image.
U034 U067
(P. 1-6-42) (P. 1-6-47)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
up/down cursor keys.
Press the enter key.
Press the system menu/counter key.
Place an original on the DP
and make a test copy.
(Printing cannot be stopped until the
preset number of sheets is printed.)
Is the image correct?
to exit maintenance mode.
1-6-52
U072
Start
Enter 072 using
Yes
Press the back key
End
Reference
Original
Press the enter key.
Press the system menu/counter key.
For copy example 1, increase the
No
value using the right cursor key.
For copy example 2, decrease the
value using the left cursor key.
Setting range: -6.6 to +6.6
Initial setting: -0.7
Changing the value by 1 moves
the center line by 0.1 mm.
Service Manual
Copy
example 1 example 2
Figure 1-6-63
The new setting
is stored.
Copy
Y104230-6