(2) Removing the main PWB
1. Remove the right cover (see page 1-6-4).
2. Remove the connector.
3. Remove the screw and then remove the speaker.
4. Remove three connectors.
5. Remove the flexible flat cable.
6. Remove seven screws and then remove the main controller shield (with main PWB).
1-6-10
Connector
Speaker
Screw
Figure 1-6-12 Removing the speaker
Figure 1-6-13 Removing the main controller shield (with main PWB)
Main controller shield
(with main PWB)
Connectors
Service Manual
Flexible flat cable
Screw
Screws
Y104230-6