Removing The Server Door (Tower Model) - IBM eserver xSeries 232 8668 Hardware Maintenance Manual

Removing the server door (tower model)

Note: The illustrations in this document might differ slightly from your hardware.
To remove the server door:
1. Unlock and open the server door.
2. Locate the flange on the top edge of the door.
3. Press down on the flange while pressing out on the door; then, lift the server
door up and off the hinge. Set the door aside in a safe place.
Removing the server door (tower model)
Bezel-release lever
Door
Flange
Installing options
47